Once you have exported your mix and started the mastering process, you may find that the impact of you track after any build ups or breakdowns may be slightly lacking. Of course you can go back to your mix to rectify this but often there is a quick fix that can work.
Import Your Finished Mix Into Your DAW
Grab your exported mix and import it into a fresh project. It’s a great idea to start with a blank template so that you have room to work and use of your entire CPU. I find treating the mastering process as a different stage of production also gives you a fresh perspective on the project.
The mix is imported.
Apply Automation to the Affected Area
Now identify the area that needs a boost. Pay special attention to areas immediately after breakdowns, build ups and drops. You may notice that they lack impact and need an extra push.
Now use volume automation to lower the section before the critical point of impact and create a small ramp. You can afford to make this pretty exaggerated, as dynamics processing during the mastering stage will generally smooth this out somewhat.
Experiment with different curves and fade lengths here. You are really trying to create a ‘transparent’ effect so the listener is not aware of any massive changes in level. They certainly shouldn’t hear the fade at all. If you can hear it, keep on working!
Repeat this process for every section in your song that needs it. And ensure all the ‘higher and ‘lower” level parts are pretty much the same throughout the project. Usually an increase of around 5 or 6 dB should really help.
The automation is applied to the appropriate area
… a zoomed out view
Apply Your Final Mastering Treatment
When your done you can master your track as you normally would. If you find the contrast you have created is not great enough you can always go back and change your automation data until your satisfied.
Really try and focus on not applying too much dynamics processing to your track here. Not only will this greatly reduce your dynamic range and suck the life out of your track but the work you have done with your automation will simply be lost.
The master is now exported.
Read more
Related to "Quick Tip: How to Increase the Impact of Builds During Mastering" :
-
AudioTutsPlus on 1/13/11
// Twice a month we revisit some of our reader favorite posts from throughout the history of Audiotuts+. This tutorial was first published in September 2008. Following my tutorial on creating a house drum track we received requests for information on creating bass lines, lead sounds, FX and arrangements. So, over the coming weeks I will be supplying step-by-step tutorials, demonstrating possible techniques for completing an electronic house track. I will build on the track in each tutorial so you can see things develop and make the Logic project available at each stage. Even though these tutorials are completed in Logic Pro 8 and in a one particular style of house, the techniques are very much generic and can be applied to any software and genre of dance music. Note: this tutorial contains embedded audio that will not display in a feed reader. Click back to the site to read the tutorial with audio or download the Play Pack at the end of the tut. 1. Choose your weapon Once... Relative News
-
Matrixsynth on 1/9/11
YouTube via avrtvtube | June 12, 2008 | 17 likes, 1 dislikes"http://www.avrtv.comWhat on earth is AVR? How did it become one of the biggest successes in the industry?And what does AVR really stand for? Watch this special to become enlightened, meet the AVR inventors and Atmel Norway founders, and get a peek inside the AVR design centre in Norway."via http://www.avrfreaks.net/ a source for AVR Relative News
-
AudioTutsPlus on 1/11/11
// We’re putting together a post on soundproofing a home studio, and would like to include as much of your advice as possible. How did you soundproof your home studio? Where did you purchase the materials? What plans do you have for the future? What issues need to be dealt with? What tricks and tips can you share? Each week we open our mic to readers and lurkers alike to come out of the woodwork and tell us your thoughts and opinion, your experiences and mistakes, what you love and what you hate. We want to hear from you, and here’s your chance. Relative News
-
Matrixsynth on 1/9/11
"MicroDRUM is the most economical and simple to build MIDI drum trigger. It’s based on Arduino and can be used with a huge variety of e-pads / e-cymbals, up to 48 inputs! The output can be sent to a PC and converted to drum sounds through VST like BFD, Addictive Drums and Superior Drummer, etc. … The accompanying software allows features not found in any similar solution: a direct interface with Relative News
-
KVR Audio on 1/13/11
13th January 2011: Arturia has announced the upcoming release of its third and most sophisticated keyboard in the Analog Experience Series: Analog Experience The Laboratory. Analog Experience The Laboratory is a profes... Relative News
-
rekkerd.org on 1/12/11
Zero-G has announced The Paradise Sessions, a new sample library from the makers of Classic Disco and Disco Gold. Relative News
-
Matrixsynth on 1/8/11
YouTube via StarrLabsZone | December 15, 2010 | follow-up to this post. "This is a quick and basic tutorial on how to set up a 'Zone' on your Ztar fretboard. Here Jacques takes us through a few easy step by step instructions on setting up '1' Zone over half the fingerboard. This is only the most basic of Zone setups. Please be sure to check our other videos where Jacques programs more complex Relative News
-
Mix on 1/11/11
For the past 25 years, the Live From Bloomington project has combined the efforts of local musical talent with its dedication to creating hunger awareness throughout the community of Bloomington, Ind. This year’s concept album, the Brio Pop Society’s Songs of Indiana, is Live From Bloomington’s 25th anniversary celebration of music and philanthropy. Relative News
-
Matrixsynth on 1/13/11
The official press release:"-Production prototype of the Fairlight CMI 30th Anniversary Edition debuts tomorrow at NAMM- $20,000 ‘vintage sampler’ faithfully recreates the look and feel of the 80’s classic which changed the course of music- Peter Gabriel, Kate Bush, Jean-Michel Jarre, Stevie Wonder, Herbie Hancock and many other icons of the eighties made musical history using their Relative News
-
AudioTutsPlus on 1/8/11
// The Mac App Store has just opened, and the first day was an unqualified success, with the download of over a million apps. What will the app store mean for audio software, and the future of the Mac? We have a look at the audio apps available on Day 1. There has been concern expressed over whether the app store is right for audio. It isn’t the right platform (in its current state) for the sale of plugins. And there is concern about the huge margins Apple make from other people’s software. Yet there are already 76 apps in the “Music” category of the store. There are also fears about whether Apple will make the Mac a closed shop by forcing all apps to be sold through the app store at some point in the future. But that remains to be seen. For now, the Mac App Store is a convenient way for Apple users to discover, install and update software. Let’s have a look at what’s available. By the way, you install the app store on your Mac by doing a standard System Update from the... Relative News